# CodeGen options
**URL:** https://talk.remobjects.com/t/codegen-options/25696
**Category:** Remoting SDK
**Tags:** codefirst, codegeneration
**Created:** [November 12, 2021, 4:01pm UTC](https://talk.remobjects.com/t/codegen-options/25696 "2021-11-12T16:01:18Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@rjantz](https://talk.remobjects.com/u/rjantz)
#### Post date: [November 12, 2021, 4:01pm UTC](https://talk.remobjects.com/t/codegen-options/25696/1 "2021-11-12T16:01:18Z")
What are the command line options for rodl2code.exe for generating an implementation .pas file with the options shown in the graphic below?
It looks from the help displayed by the command line that I can set the code first option but how can I set the others?
---
### Author:  [@EvgenyK](https://talk.remobjects.com/u/EvgenyK)
#### Post date: [November 12, 2021, 4:32pm UTC](https://talk.remobjects.com/t/codegen-options/25696/2 "2021-11-12T16:32:44Z")
Hi,
these options aren’t supported by rodl2code.
if you want, you can create Delphi utility based on attached Delphi example [rocg4\_helper.zip](https://talk.remobjects.com/uploads/short-url/pIVS7C1mKpZATTuaOzOV4t7zb4x.zip) (21.6 KB)
---
### Author:  [@RemObjectsSoftware](https://talk.remobjects.com/u/RemObjectsSoftware)
#### Post date: [November 12, 2021, 4:43pm UTC](https://talk.remobjects.com/t/codegen-options/25696/5 "2021-11-12T16:43:49Z")
Logged as [bugs://D19181](https://www.remobjects.com/portal/bugs/?id=D19181).
---
### Author:  [@rjantz](https://talk.remobjects.com/u/rjantz)
#### Post date: [November 12, 2021, 4:58pm UTC](https://talk.remobjects.com/t/codegen-options/25696/6 "2021-11-12T16:58:13Z")
I am unable to compile the rocg4\_helper project because I have not been able to locate a dcu or pas file named ToolsAPI. Any ideas where it might be?
---
### Author:  [@EvgenyK](https://talk.remobjects.com/u/EvgenyK)
#### Post date: [November 12, 2021, 5:03pm UTC](https://talk.remobjects.com/t/codegen-options/25696/7 "2021-11-12T17:03:16Z")
Hi,
add `C:\Program Files (x86)\RemObjects Software\RemObjects SDK for Delphi\Source\IDE` to `Search Path` and rebuild project.
In this case, `uROCodegen4Helper` unit will be compiled w/o design-time units
---
### Author:  [@RemObjectsSoftware](https://talk.remobjects.com/u/RemObjectsSoftware)
#### Post date: [November 26, 2021, 3:14pm UTC](https://talk.remobjects.com/t/codegen-options/25696/8 "2021-11-26T15:14:44Z")
[bugs://D19181](https://www.remobjects.com/portal/bugs/?id=D19181) was closed as fixed.
---
### Author:  [@fvancrae](https://talk.remobjects.com/u/fvancrae)
#### Post date: [April 7, 2022, 4:20pm UTC](https://talk.remobjects.com/t/codegen-options/25696/9 "2022-04-07T16:20:35Z")
FYI: I get another error but it can also be resolved by expanding the search path
Note: My v10.0.0.1521 still has to add the searchpath for ToolsAPI too
---
### Author:  [@EvgenyK](https://talk.remobjects.com/u/EvgenyK)
#### Post date: [April 8, 2022, 6:19am UTC](https://talk.remobjects.com/t/codegen-options/25696/11 "2022-04-08T06:19:54Z")
Hi,
```auto
{$IFDEF DESIGNTIME}uEWOTAHelpers,{$ENDIF}
```
this unit is required in DESIGNTIME mode, i.e. when this file is used in RO\_IDE package only